Steel Ladle Refractories - Resco Products

Steel Ladle

Steel Ladle Diagram Resco Products

Steel Ladles and Refractory Products

Steel companies need high-quality refractory solutions that achieve maximum productivity at the lowest cost. Ladle refractory construction are customized to each factory working conditions to optimize the life and yield of the refractory. Resco Products provides unique refractory solutions for each customer.

Resco provides the whole solution for the safety lining and working lining: bottom, sidewall & slag line. Resco will recommend the best castable, brick, mortar, plastic/ram, and shotcrete/pump cast solution for your ladle. Are your current refractories the best for your operation? Is it time to upgrade your ladle refractory lining?

Resco Products ladle representative evaluates the conditions in which your ladles operate and any stress points within the ladle. Resco will also evaluate all aspects of the ladle zones. The ladle zones are the working bottom, impact zone bottom, impact zone wall, sidewall, transition, slag line, and ladle lip.

Lasering Ladle Resco Products

Resco Products has the experience of selecting the right type of refractory materials. Ladle linings designed such as iron charging ladles, torpedo cars, transfer ladles, and more. Are you having issues with your ladles, contact us and Resco can help you solve/avoid problems.

All our steel refractory products are domestically produced allowing Resco to have shorter lead times. Listed below are some of Resco's product groups.

  • Burned Basic Brick
  • Basic Monolithics
  • High fired alumina brick
  • Dolomite brick
  • Dolomite specialties
  • High alumina brick
  • Wet mortars
  • Castable plastics
  • Gun Mixes

 Common products utilized in steel ladles consist of AMG90, AMG95, Nuline 10MFX, and Vibrocast 75.  Our semi-universal ladle brick is the solution for you.

RELATED PRODUCTS
Wet Mortar

Adacor 70 DipArrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 70 TR-D3.5Arrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 DipArrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 TR-D3.5Arrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adaphos 85 DipArrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
PDS SDS
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Wet Mortar

Adaphos 85 TR-D3Arrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
PDS SDS
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Coatings

Blox StixArrow icon

BLOX STIX is a fibrous adhesive used to adhere block insulation to steel or other substrates. BLOX STIX aids the installation of mineral fiber, calcium, silicate and vermiculite based block insulation.
PDS SDS
BLOX STIX is a fibrous adhesive used to adhere block insulation to steel or other substrates. BLOX STIX aids the installation of mineral fiber, calcium, silicate and vermiculite based block insulation.
Dolomite Mix

DOL-Mix-BLArrow icon

High purity sintered dolomite that is sized and blended with a small amount of non-aqueous liquids to reduce dusting. DOL-MIX-BL is used in ladles and AOD’s as a bottom levelling material between working and safety linings.
PDS SDS
High purity sintered dolomite that is sized and blended with a small amount of non-aqueous liquids to reduce dusting. DOL-MIX-BL is used in ladles and AOD’s as a bottom levelling material between working and safety linings.
RAM

DOL-Mix-R+Arrow icon

DOL-MIX-R+ is a dolomite-based ram mix with an improved binder system
PDS SDS
DOL-MIX-R+ is a dolomite-based ram mix with an improved binder system
RAM

DOL-Mix-R50+Arrow icon

Rotary kiln sintered dolomite and burnt magnesite grains that are sized and blended with a proprietary mix of nonaqueous organic binders. The organic system provides an intermediate bond until a strong ceramic bond is developed at service temperatures. DOL-MIX-R50+ is primarily used as a high temperature ramming material in plug bottom design ladles and AOD’s, and as a filling ram around well blocks and porous plug blocks.
PDS SDS
Rotary kiln sintered dolomite and burnt magnesite grains that are sized and blended with a proprietary mix of nonaqueous organic binders. The organic system provides an intermediate bond until a strong ceramic bond is developed at service temperatures. DOL-MIX-R50+ is primarily used as a high temperature ramming material in plug bottom design ladles and AOD’s, and as a filling ram around well blocks and porous plug blocks.
Conventional Castable

HM 70Arrow icon

HM 70 is a High Alumina refractory composition bonded with Low Iron Cement. HM 70 is designed for general purpose repairs where there is a need for resistance to high temperatures and erosion.
PDS SDS
HM 70 is a High Alumina refractory composition bonded with Low Iron Cement. HM 70 is designed for general purpose repairs where there is a need for resistance to high temperatures and erosion.
Dolomite Brick

KD30-DOLArrow icon

High purity sintered dolomite that is sized, blended with magnesite, pressed into a brick shape, then fired in a high temperature tunnel kiln to create a strong ceramically bonded brick. KD30-DOL is a premium quality refractory for more aggressive wear areas in tuyere pads and slaglines of AOD’s, VOD’s and ladle furnaces.
PDS SDS
High purity sintered dolomite that is sized, blended with magnesite, pressed into a brick shape, then fired in a high temperature tunnel kiln to create a strong ceramically bonded brick. KD30-DOL is a premium quality refractory for more aggressive wear areas in tuyere pads and slaglines of AOD’s, VOD’s and ladle furnaces.
Dolomite Brick

KD50 Z TL0828Arrow icon

Low Cement Castable

Kricon 32-70Arrow icon

KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
PDS SDS
KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
Wet Mortar

Ladlelock 3000 DipArrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 GU-TR-D3.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 GU-TR-W-D3.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 NW-TR-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 NW-TR-W-2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TF-TR-D3Arrow icon

LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
PDS SDS
LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
Wet Mortar

Ladlelock 3000 TR-D2Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TR-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TR-W-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 50S DipArrow icon

LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
SDS
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 50S Dip-WArrow icon

LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
SDS
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 70 JP-TR-D3Arrow icon

LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
PDS SDS
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 70 JP-TR-W-D3Arrow icon

LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
PDS SDS
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 70 TF-TR-D3Arrow icon

LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
PDS SDS
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 70 TR-D3.5Arrow icon

LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
PDS SDS
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar

Ladlelock 80 DipArrow icon

Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
PDS SDS
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar

Ladlelock 80 Dip-WArrow icon

Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
PDS SDS
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar

Ladlelock 80 TR-D2Arrow icon

Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
PDS SDS
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar

Ladlelock 80 TR-D3Arrow icon

Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
PDS SDS
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar

Ladlelock 80 TR-W-D3Arrow icon

Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
PDS SDS
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar

Ladlelock 85 DipArrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 Dip-WArrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 PB-TR-D3Arrow icon

LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
PDS SDS
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar

Ladlelock 85 PR-TR-D4Arrow icon

LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
PDS SDS
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar

Ladlelock 85 TR-D3Arrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 TR-W-D3Arrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 90 PBP-DipArrow icon

LADLELOCK 90 PBP is a Premium, Phosphate-Bonded, 90% Alumina Mortar and is available in a premixed, Dipping consistency.
PDS SDS
LADLELOCK 90 PBP is a Premium, Phosphate-Bonded, 90% Alumina Mortar and is available in a premixed, Dipping consistency.
Wet Mortar

Ladlelock 90 PB-TR-D2Arrow icon

LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
PDS SDS
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar

Ladlelock 90 PB-TR-D3Arrow icon

LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
PDS SDS
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar

Ladlelock 90 PB-TR-W-D2Arrow icon

LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
PDS SDS
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar

Ladlelock 90 PB-TR-W-D2.5Arrow icon

LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
PDS SDS
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar

Ladlelock 90PB-TR-D2.5Arrow icon

LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
PDS SDS
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar

Ladlelock PB CR5-TR-D3.5Arrow icon

PDS SDS
Alumina Brick

LadleMax AMGArrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Alumina Brick

LadleMax AMG 90Arrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Alumina Brick

LadleMax AMG 90 SLArrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Alumina Brick

LadleMax AMG 95Arrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Alumina Brick

LadleMax AMG HPArrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Alumina Brick

LadleMax AMG HP SLArrow icon

Resin bonded, alumina-magnesia-carbon brick
PDS SDS
Resin bonded, alumina-magnesia-carbon brick
Wet Mortar

LL 90 PB-C 3% GraphiteArrow icon

LL 90 PB-C is a Premium, Carbon-Containing, Phosphate-Bonded, 90% Alumina Mortar containing 3% Graphite. This mortar is available in a premixed consistency and can be used where mortar will be exposed to molten metal and slags. This carbon-containing product is recommended for use in reducing atmospheres.
PDS SDS
LL 90 PB-C is a Premium, Carbon-Containing, Phosphate-Bonded, 90% Alumina Mortar containing 3% Graphite. This mortar is available in a premixed consistency and can be used where mortar will be exposed to molten metal and slags. This carbon-containing product is recommended for use in reducing atmospheres.
Magnesia Brick

MaxLine 10 MFZArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

MaxLine 10 NFYArrow icon

Resin bonded, fused grain magnesia-carbon brick
PDS SDS
Resin bonded, fused grain magnesia-carbon brick

Maxline 10AArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

MaxLine 13 LFXArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Maxline 13 NFYArrow icon

Resin Bonded, magnesia-carbon brick
PDS SDS
Resin Bonded, magnesia-carbon brick
Magnesia Brick

Maxline 13AArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Maxline 15AArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Nuline 10 MFXArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Nuline 5LAArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Nuline MAX 10Arrow icon

alumina enhancement, Resin bonded
PDS SDS
alumina enhancement, Resin bonded
Magnesia Brick

Nuline R-5 SAArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
RAM

R 50 DVArrow icon

RESCO's R 50 DV is a Heat-Setting, 45% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-50 DV is installed by pneumatic ramming methods.
PDS SDS
RESCO's R 50 DV is a Heat-Setting, 45% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-50 DV is installed by pneumatic ramming methods.
RAM

R 60 DVArrow icon

RESCO's R 60 DV is a Heat-Setting, 60% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-60 DV is installed by pneumatic ramming methods.
PDS SDS
RESCO's R 60 DV is a Heat-Setting, 60% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-60 DV is installed by pneumatic ramming methods.
RAM

R 85 DVArrow icon

RESCO's R 85 DV is a Heat-Setting, 80% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-85 DV is installed by pneumatic ramming methods.
PDS SDS
RESCO's R 85 DV is a Heat-Setting, 80% Alumina, Dry Vibratable Mix that is used primarily in the steel industry. This product is slightly tempered to control dusting. R-85 DV is installed by pneumatic ramming methods.
Alumina Brick

R-80BArrow icon

Burned fire high alumina brick
PDS SDS
Burned fire high alumina brick
Dolomite Brick

RDG-DOLArrow icon

High purity sintered dolomite that is sized, blended with a resin system, pressed, and heated to remove volatiles and create good ambient temperature strength.RDG-DOL is a denser, more slag resistant sidewall and bottom working lining material for use in transfer and casting ladles.
PDS SDS
High purity sintered dolomite that is sized, blended with a resin system, pressed, and heated to remove volatiles and create good ambient temperature strength.RDG-DOL is a denser, more slag resistant sidewall and bottom working lining material for use in transfer and casting ladles.
Plastic

Ref Ram 870FG-MArrow icon

Phos free, fine grain, high alumina, high quality matrix patch refractory possessing volume stability. Resistant to metal penetration with excellent density. Grain structure allows for this veneering. Workability consistent with use in some patching applications.
PDS SDS
Phos free, fine grain, high alumina, high quality matrix patch refractory possessing volume stability. Resistant to metal penetration with excellent density. Grain structure allows for this veneering. Workability consistent with use in some patching applications.
Alumina Brick

Rescal 70DArrow icon

High alumina brick
PDS SDS
High alumina brick
Alumina Brick

Rescal 85 BArrow icon

High alumina, high strength brick
PDS SDS
High alumina, high strength brick
RAM

Resco LRArrow icon

RESCO LR is a phosphate-bonded, 80% alumina, granular ramming mix that is used primarily in the steel industry. This product is installed by pneumatic ramming methods.
PDS SDS
RESCO LR is a phosphate-bonded, 80% alumina, granular ramming mix that is used primarily in the steel industry. This product is installed by pneumatic ramming methods.
Plastic

Rescoram 85Arrow icon

RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Dolomite Brick

RG6-DOLArrow icon

High purity sintered dolomite that is sized, blended with a resin and carbon system, pressed and heated to remove volatiles and create good ambient temperature strength.RG6-DOL has a high residual carbon content that provides increased thermal shock and slag penetration resistance. RG6-DOL is used for slag lines and impact pads in ladles.
PDS SDS
High purity sintered dolomite that is sized, blended with a resin and carbon system, pressed and heated to remove volatiles and create good ambient temperature strength.RG6-DOL has a high residual carbon content that provides increased thermal shock and slag penetration resistance. RG6-DOL is used for slag lines and impact pads in ladles.
Dolomite Brick

RG7-DOLArrow icon

High purity sintered dolomite that is sized, blended with a resin and carbon system, pressed and heated to remove volatiles and create good ambient temperature strength.  RG7-DOL has a higher residual carbon content that provides improved thermal shock and slag penetration resistance.  RG7-DOL is used for steel ladle slag lines and barrels.
PDS SDS
High purity sintered dolomite that is sized, blended with a resin and carbon system, pressed and heated to remove volatiles and create good ambient temperature strength.  RG7-DOL has a higher residual carbon content that provides improved thermal shock and slag penetration resistance.  RG7-DOL is used for steel ladle slag lines and barrels.
Alumina Brick

Seneca 80XDArrow icon

Burned, high alumina brick
PDS SDS
Burned, high alumina brick
Alumina Brick

Seneca 85Arrow icon

Burned, high alumina brick
PDS SDS
Burned, high alumina brick
RAM

ST-001 Patching MixArrow icon

A high alumina material designed for hand application to patch hot refractory surfaces. Ideal for patching lances, small ladles, spouts, tundishes and doors. ST-001 can also be used for cold patching. It is ready to use as received.
PDS SDS
A high alumina material designed for hand application to patch hot refractory surfaces. Ideal for patching lances, small ladles, spouts, tundishes and doors. ST-001 can also be used for cold patching. It is ready to use as received.
Magnesia Brick

TL0770Arrow icon

magnesia-carbon brick
PDS SDS
magnesia-carbon brick
Magnesia Brick

TL0909Arrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

TL0927Arrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

TL0959Arrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Pre-Cast Shapes

Uniform 90ARSArrow icon

Uniform 90 ARS is a precast shape made with a tabular alumina / spinel, low moisture castable. The addition of spinel significantly improves this castables hot strength and resistance to slag attack.
PDS SDS
Uniform 90 ARS is a precast shape made with a tabular alumina / spinel, low moisture castable. The addition of spinel significantly improves this castables hot strength and resistance to slag attack.
Pre-Cast Shapes

Uniform 97Arrow icon

UNIFORM 97 is a silica-free, low cement, high purity alumina cast shape. This cast shape can be used in high temperature applications and where a silica-free, high purity alumina products are applicable.
PDS SDS
UNIFORM 97 is a silica-free, low cement, high purity alumina cast shape. This cast shape can be used in high temperature applications and where a silica-free, high purity alumina products are applicable.
Low Cement Castable

Vibrocast ASCArrow icon

VIBROCAST ASC TL0906 is an alumina-spinel castable. This castables can be installed by vibration casting methods or used in manufacture of precast shapes
PDS SDS
VIBROCAST ASC TL0906 is an alumina-spinel castable. This castables can be installed by vibration casting methods or used in manufacture of precast shapes
Low Cement Castable

Vibrocast ASC 4LG TL0918Arrow icon

VIBROCAST ASC 4LG TL0918 is an high purity, alumina-spinel gunning mix that can be gunned using conventional gunning methods. This gun mix was formulated for steel ladle maintenance.
PDS SDS
VIBROCAST ASC 4LG TL0918 is an high purity, alumina-spinel gunning mix that can be gunned using conventional gunning methods. This gun mix was formulated for steel ladle maintenance.
Low Cement Castable

Vibrocast ASC-8LT CArrow icon

VIBROCAST ASC-8LT(C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT(C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
PDS SDS
VIBROCAST ASC-8LT(C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT(C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
Low Cement Castable

Vibrocast ASC-8LT C-CArrow icon

VIBROCAST ASC-8LT (C-C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT (C-C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
PDS SDS
VIBROCAST ASC-8LT (C-C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT (C-C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
Low Cement Castable

Vibrocast ASC-8LT(C)AKArrow icon

VIBROCAST ASC-8LT(C)-AK is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT(C)-AK is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
PDS SDS
VIBROCAST ASC-8LT(C)-AK is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT(C)-AK is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
Pre-Cast Shapes

Vibrocast ASC-8LT(C-C)Arrow icon

VIBROCAST ASC-8LT (C-C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT (C-C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
PDS SDS
VIBROCAST ASC-8LT (C-C) is a high purity, low-cement, alumina-spinel castable designed to provide maximum resistance to molten steel and steelmaking slags. VIBROCAST ASC-8LT (C-C) is designed for production of cast shapes or monolithic placement in steel ladles and related steelmaking environments. This product should be installed by vibration casting only.
Low Cement Castable

Vibrocast EZ 80Arrow icon

VIBROCAST EZ 80 is an economical, Low Cement, 80% Alumina castable that should be installed by vibration cast methods only.
PDS SDS
VIBROCAST EZ 80 is an economical, Low Cement, 80% Alumina castable that should be installed by vibration cast methods only.