Ferro Alloy Refractories - Resco Products

Ferro Alloy

Resco Products is a leader in refractory products for the ferroalloy industry. Resco provides the complete refractory solution for blast furnace, electric arc furnace, and more. Resco has a proven track record within the industry. Resco provides high-quality industry-standard products as well as fully customized solutions to prevent extended downtime and equipment failure. Your specialist will evaluate your procedures and conditions to make the most informed recommendations.

For the Ferro Alloy application Resco Products commonly sells Rescal 70D, Dura-Tab, Guidon LS, & Seneca 85.  

 
 
RELATED PRODUCTS
Caulk

22 CaulkArrow icon

22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
PDS SDS
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Caulk

22 Caulk (UK)Arrow icon

22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
PDS SDS
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Wet Mortar

Adacor 70 DipArrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 70 TR-D3.5Arrow icon

ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 DipArrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adacor 80 TR-D3.5Arrow icon

ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
PDS SDS
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar

Adaphos 85 DipArrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
PDS SDS
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Wet Mortar

Adaphos 85 TR-D3Arrow icon

ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
PDS SDS
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Alumina Brick

Alumex P-85-HSArrow icon

ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
PDS SDS
ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
Dry Mortar

AlutabArrow icon

ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
PDS SDS
ALUTAB® is a high purity, 85% alumina mortar compatible with 70%, 80%, and 90% alumina brick. It is designed for use under the most severe conditions where high refractoriness, good bond strength, and resistance to attack by molten metal and slag are the prime requirements. It is air-setting with a 3400°F service temperature limit.
Pressed Shape

C-4Arrow icon

Highly refractory material used in the continuous casting process for making metal railroad wheels. It is non-wetting for ferrous metals.
PDS SDS
Highly refractory material used in the continuous casting process for making metal railroad wheels. It is non-wetting for ferrous metals.
Kiln Furnitures

Cordierite Mix 05-05Arrow icon

A high strength, thermal shock resistant, pressed cordierite mix suited for kiln furniture requirements
PDS SDS
A high strength, thermal shock resistant, pressed cordierite mix suited for kiln furniture requirements
Plastic

CorlineArrow icon

CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
PDS SDS
CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
RAM

Corpatch 80 MSArrow icon

CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
PDS SDS
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
Alumina Brick

DuraLite 70 GArrow icon

Burned High Alumina Brick
PDS SDS
Burned High Alumina Brick
Alumina Brick

DuraLite 80 GArrow icon

High Alumina Brick
PDS SDS
High Alumina Brick
Alumina Brick

DuraLite 85 GArrow icon

High Alumina Brick
PDS SDS
High Alumina Brick
Low Cement Castable

EZ Cubed 70PCArrow icon

EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
Low Cement Castable

EZ Cubed 80-15Arrow icon

EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Ultra Low Cement

FERMET 70 (UK)Arrow icon

Fermet 70 is a corundum / andalusite based ultra low cement castable with good resistance to slags found in the ferrosilicon industry.
PDS
Fermet 70 is a corundum / andalusite based ultra low cement castable with good resistance to slags found in the ferrosilicon industry.
Ultra Low Cement

FERMET 70SF (UK)Arrow icon

Fermet 70SF is a self flowing corundum/mullite based ultra low cement castable with low titanium oxide and phosphate levels. It has excellant resistance to slags found in the silicon metal and ferrosilicon industries.
PDS SDS
Fermet 70SF is a self flowing corundum/mullite based ultra low cement castable with low titanium oxide and phosphate levels. It has excellant resistance to slags found in the silicon metal and ferrosilicon industries.
Wet Mortar

Ladlelock 3000 DipArrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 GU-TR-D3.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 GU-TR-W-D3.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 NW-TR-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 NW-TR-W-2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TF-TR-D3Arrow icon

LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
PDS SDS
LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
Wet Mortar

Ladlelock 3000 TR-D2Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TR-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 3000 TR-W-D2.5Arrow icon

LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
PDS SDS
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar

Ladlelock 85 DipArrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 Dip-WArrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 PB-TR-D3Arrow icon

LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
PDS SDS
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar

Ladlelock 85 PR-TR-D4Arrow icon

LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
PDS SDS
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar

Ladlelock 85 TR-D3Arrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar

Ladlelock 85 TR-W-D3Arrow icon

LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
PDS SDS
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Insulating Firebrick

LW-28Arrow icon

2800ºF insulating fire brick
PDS SDS
2800ºF insulating fire brick
Insulating Firebrick

LW-32Arrow icon

3200ºF insulating fire brick
PDS SDS
3200ºF insulating fire brick
Magnesia Brick

Nuline 10-99Arrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Magnesia Brick

Nuline 13 DFArrow icon

Resin bonded, magnesia-carbon brick
PDS SDS
Resin bonded, magnesia-carbon brick
Alumina Brick

Patriot HFArrow icon

High fired, super duty, carbon monoxide resistant brick
PDS SDS
High fired, super duty, carbon monoxide resistant brick
Basic Monolithics

Permanente 165 AF CastableArrow icon

PERMANENTE® 165-AF is a magnesite-based, basic castable with a unique, nonchromate bonding system and can be installed by vibration casting or ramming methods, to maximize properties.
PDS SDS
PERMANENTE® 165-AF is a magnesite-based, basic castable with a unique, nonchromate bonding system and can be installed by vibration casting or ramming methods, to maximize properties.
Basic Monolithics

Permanente 165 AF Ram MixArrow icon

PERMANENTE® 165-AF RAM MIX is a fine sized high MgO material intended for leveling ladle bottoms and for backfill behind working linings in ladles, AOD degassers and other metallurgical vessels. It can be rammed or cast.
PDS SDS
PERMANENTE® 165-AF RAM MIX is a fine sized high MgO material intended for leveling ladle bottoms and for backfill behind working linings in ladles, AOD degassers and other metallurgical vessels. It can be rammed or cast.
Dry Mortar

Permanente MortarArrow icon

PERMANENTE® MORTAR is a dry, heat setting, high magnesia mortar. This magnesite mortar is designed to lay up basic brick. Ideally suited for use with magnesite or magnesia-carbon brick. This mortar is suggested for working and safety linings in both steel and non-ferrous metals applications.
PDS SDS
PERMANENTE® MORTAR is a dry, heat setting, high magnesia mortar. This magnesite mortar is designed to lay up basic brick. Ideally suited for use with magnesite or magnesia-carbon brick. This mortar is suggested for working and safety linings in both steel and non-ferrous metals applications.
Alumina Brick

Rescal 70DArrow icon

High alumina brick
PDS SDS
High alumina brick
Alumina Brick

Rescal 85 BArrow icon

High alumina, high strength brick
PDS SDS
High alumina, high strength brick
Alumina Brick

Rescal 90 XD-GArrow icon

Burned, high alumina brick
PDS SDS
Burned, high alumina brick
Plastic

Rescoram 10CRArrow icon

RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 20CRArrow icon

RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
PDS SDS
RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
Plastic

Rescoram 70 BlueArrow icon

RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
PDS SDS
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
Plastic

Rescoram 85SArrow icon

Phosphate bonded alumina plastic
PDS SDS
Phosphate bonded alumina plastic
Plastic

Rescoram 90Arrow icon

RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Conventional Castable

SakoniteArrow icon

SAKONITE® is a very economical refractory concrete. Although its maximum service temperature is 2200°F, it is designed primarily for service between 70°F and 1000°F. It is widely used for cast floors exposed to molten metals or hot ingots. It can be cast or pumped and finished like ordinary concrete. It may also be rammed or cast-vibrated for increased density and strength with minimum shrinkage. SAKONITE® is also available as GC SAKONITE® gun mix.
PDS SDS
SAKONITE® is a very economical refractory concrete. Although its maximum service temperature is 2200°F, it is designed primarily for service between 70°F and 1000°F. It is widely used for cast floors exposed to molten metals or hot ingots. It can be cast or pumped and finished like ordinary concrete. It may also be rammed or cast-vibrated for increased density and strength with minimum shrinkage. SAKONITE® is also available as GC SAKONITE® gun mix.
Alumina Brick

Seneca 80Arrow icon

High alumina brick
PDS SDS
High alumina brick
Alumina Brick

Seneca 85Arrow icon

Burned, high alumina brick
PDS SDS
Burned, high alumina brick
Low Cement Castable

Unicrete 60 FlowzArrow icon

UNICRETE 60 FLOWZ is a self-flow, shotcretable, low cement castable. The properties of low cement castables are sensitive to the amount of mixing water used during casting. The best physical properties are achieved when mixing water is kept to a minimum, the material is mixed thoroughly and as much vibration as possible is used when casting.
PDS SDS
UNICRETE 60 FLOWZ is a self-flow, shotcretable, low cement castable. The properties of low cement castables are sensitive to the amount of mixing water used during casting. The best physical properties are achieved when mixing water is kept to a minimum, the material is mixed thoroughly and as much vibration as possible is used when casting.
Pre-Cast Shapes

Uniform 65LCArrow icon

UNIFORM 65 LC is a precast shape made with a high strength, low moisture castable based on hard fired alumina/silica aggregate. UNIFORM 65 LC is designed for maximum resistance to abrasion and erosion.
PDS SDS
UNIFORM 65 LC is a precast shape made with a high strength, low moisture castable based on hard fired alumina/silica aggregate. UNIFORM 65 LC is designed for maximum resistance to abrasion and erosion.
Pre-Cast Shapes

Uniform 70 UCXCArrow icon

UNIFORM 70 UCXC is a coarse grain-containing, ultralow cement, 70% alumina precast shape. This precast mix features excellent dimensional stability, strength, and corrosion resistance and is available with stainless steel fibers for additional strength and spall resistance.
PDS SDS
UNIFORM 70 UCXC is a coarse grain-containing, ultralow cement, 70% alumina precast shape. This precast mix features excellent dimensional stability, strength, and corrosion resistance and is available with stainless steel fibers for additional strength and spall resistance.
Pre-Cast Shapes

Uniform 85LCXCArrow icon

UNIFORM 85 LCXC is a precast shape made with an Coarse Grain-containing 85% Alumina, Low Cement Castable. For added strength and spalling resistance, UNIFORM 85 LCXC is available with stainless steel fiber additions.
PDS SDS
UNIFORM 85 LCXC is a precast shape made with an Coarse Grain-containing 85% Alumina, Low Cement Castable. For added strength and spalling resistance, UNIFORM 85 LCXC is available with stainless steel fiber additions.
Pre-Cast Shapes

Uniform 90ARSArrow icon

Uniform 90 ARS is a precast shape made with a tabular alumina / spinel, low moisture castable. The addition of spinel significantly improves this castables hot strength and resistance to slag attack.
PDS SDS
Uniform 90 ARS is a precast shape made with a tabular alumina / spinel, low moisture castable. The addition of spinel significantly improves this castables hot strength and resistance to slag attack.