Fluid Catalytic Cracking (FCCU) Refractories - Resco Products

Fluidized Catalytic Cracking Unit (FCCU)

Fluid Catalytic Cracking Unit (FCCU) is a secondary process for lighting the heavy oil. Typical FCC units have run times the long term of five or six years which puts even more emphasis on refractory planning and installation. From installation, controlling the rate of temperature change, and minimizing rapid fluctuations are critical. This will extend the life of the FCC refractory.

The fluid catalytic cracker, or cat unit, is made up of six major sections. This includes the reactor & regenerator, transfer lines, internal cyclones, slide valves, overhead lines, and the distribution rig/grid. Resco refractory solutions provide reduced downtime/costs, improved energy & production efficiency, high abrasion, corrosion and thermal shock resistance, thermal reliability, and insulation.FCC Process Map and Product Recommendations - Resco Products

Our Resco specialists have knowledge on FCCU refractories and skilled engineering teams. Resco evaluates and provides innovative custom solutions to help increase your productivity. Contact us today. 

Reactor & Regenerator

Rescobond AA-22S
Rescocast 6
Rescocast 7
Rescocast 110EZ
R-Max MP/C/G

 Transfer Lines

Rescobond AA-22S
Rescocast 17EG
R-Max MP
Rescocast 110C
Sureflow 17E

Internal Cyclones

Rescobond AA-22S
R-Max MP/C/G 

 Slide Valves

Distribution Grid 

 Overhead Lines

Rescocast 17 EMC/G
Rescocast 110C/G
Sureflow 110
EZ Cubed FS-6 PC

RELATED PRODUCTS
Caulk

22 CaulkArrow icon

22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Chemically Bonded Castables

AA-22 BrushmixArrow icon

AA-22 BRUSH MIX is a material that coating is ideal for strengthening existing refractory lining surfaces. It can be applied up to 1/4” thick providing increased refractory protection without a great loss of volume to your unit. AA-22 BRUSH MIX is supplied wet or dry. however, water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.
AA-22 BRUSH MIX is a material that coating is ideal for strengthening existing refractory lining surfaces. It can be applied up to 1/4” thick providing increased refractory protection without a great loss of volume to your unit. AA-22 BRUSH MIX is supplied wet or dry. however, water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.
Alumina Brick

DuraLite 90 GArrow icon

High Alumina Brick
High Alumina Brick
Low Cement Castable

EZ Cast 3400Arrow icon

EZ CAST® 3400 is a self-flowing, 99% alumina, low cement castable for applications up to 3400°F. It has low porosity and low permeability without a sacrifice in thermal shock resistance. This product is not recommended for pumping.
EZ CAST® 3400 is a self-flowing, 99% alumina, low cement castable for applications up to 3400°F. It has low porosity and low permeability without a sacrifice in thermal shock resistance. This product is not recommended for pumping.
Low Cement Castable

Kricon 34Arrow icon

KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
Low Cement Castable

Kricon 34-10Arrow icon

KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
Low Cement Castable

Kricon CCM-30Arrow icon

KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
Insulating Castable

LHV-124Arrow icon

LHV-124 is a lumnite, haydite, and vermiculite (LHV) mix. It is a lightweight, 60 pcf insulating castable that can be installed by casting methods.
LHV-124 is a lumnite, haydite, and vermiculite (LHV) mix. It is a lightweight, 60 pcf insulating castable that can be installed by casting methods.
Insulating Firebrick

LW-26Arrow icon

2600ºF insulating fire brick
2600ºF insulating fire brick
Insulating Firebrick

LW-28Arrow icon

2800ºF insulating fire brick
2800ºF insulating fire brick
Alumina Brick

PatriotArrow icon

Burned fire clay brick
Burned fire clay brick
Conventional Castable

Purocast NArrow icon

PUROCAST® N is a 3000°F castable that will withstand rapid heat-up. It is a low iron, high alumina material capable of withstanding reducing or hydrogen atmospheres, carbon deposition, and high sulfur fuels. It has good volume stability, excellent resistance to spalling, and low thermal conductivity.
PUROCAST® N is a 3000°F castable that will withstand rapid heat-up. It is a low iron, high alumina material capable of withstanding reducing or hydrogen atmospheres, carbon deposition, and high sulfur fuels. It has good volume stability, excellent resistance to spalling, and low thermal conductivity.
Conventional Castable

PuroTabArrow icon

PUROTAB® is a high purity, low iron, high alumina castable designed specifically for use at temperatures up to 3400°F. It is made with tabular alumina aggregate bonded with a high purity calcium aluminate cement. It is highly resistant to reducing atmospheres as well as high sulfur fuels and charge stocks. It has good volume stability with very good resistance to thermal shock
PUROTAB® is a high purity, low iron, high alumina castable designed specifically for use at temperatures up to 3400°F. It is made with tabular alumina aggregate bonded with a high purity calcium aluminate cement. It is highly resistant to reducing atmospheres as well as high sulfur fuels and charge stocks. It has good volume stability with very good resistance to thermal shock
Alumina Brick

Rescal 90 XD-GArrow icon

Burned, high alumina brick
Burned, high alumina brick
Chemically Bonded Castables

Rescobond 17GArrow icon

RESCOBOND 17G isdesigned for use in U-Bends, Y-Sections, overhead lines, and other catalyst transfer lines. It is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 17G should NOT be installed by vibration casting methods.
RESCOBOND 17G isdesigned for use in U-Bends, Y-Sections, overhead lines, and other catalyst transfer lines. It is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 17G should NOT be installed by vibration casting methods.
Chemically Bonded Castables

Rescobond 17HPArrow icon

RESCOBOND 17HP is a chemically-bonded, air-setting, single component refractory formulated to be handpacked in catalyst transfer line field joints, cones, nozzles, and other tight area applications in oil refineries. This product bonds to existing refractory and can be used to patch in-situ transfer lines, etc.
RESCOBOND 17HP is a chemically-bonded, air-setting, single component refractory formulated to be handpacked in catalyst transfer line field joints, cones, nozzles, and other tight area applications in oil refineries. This product bonds to existing refractory and can be used to patch in-situ transfer lines, etc.
Chemically Bonded Castables

Rescobond AA-22SArrow icon

Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.
Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.
Chemically Bonded Castables

Rescobond AA-22S (UK)Arrow icon

Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.
Rescobond AA-22S is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond AA-22S with water. Rescobond AA-22S is an air setting material. It can also be used to patch other refractory linings.
Chemically Bonded Castables

Rescobond Dry Brush MixArrow icon

<table border="0" cellspacing="0" cellpadding="0" class="" style="width: 100%"> <colgroup><col></colgroup> <tbody> <tr> <td> <p>Rescobond BRUSH MIX DRY is a dry material that when mixed with water is ideal for strengthening existing refractory lining surfaces. It can be applied up to ¼â€ť thick providing increased refractory protection without a great loss of volume to your unit. Additional water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.</p> <div><br> </div> </td> </tr> </tbody> </table> <br>
<table border="0" cellspacing="0" cellpadding="0" class="" style="width: 100%"> <colgroup><col></colgroup> <tbody> <tr> <td> <p>Rescobond BRUSH MIX DRY is a dry material that when mixed with water is ideal for strengthening existing refractory lining surfaces. It can be applied up to ¼â€ť thick providing increased refractory protection without a great loss of volume to your unit. Additional water can be added to adjust the consistency. It can be applied with a brush, trowel, rubber float, roller, sprayer, etc. It hardens in air and becomes non-hydroscopic when heated to only 250 - 300°F.</p> <div><br> </div> </td> </tr> </tbody> </table> <br>
Chemically Bonded Castables

Rescobond MAAXArrow icon

Rescobond MAAX, like Rescobond AA-22S, is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond MAAX with water. Rescobond MAAX is an air setting material, and it utilizes the same binder system as Rescobond AA-22S. It can also be used to patch other refractory linings. Rescobond MAAX is an upgraded version of Rescobond AA-22S.
Rescobond MAAX, like Rescobond AA-22S, is a chemically bonded, erosion resistant, single component refractory material used primarily in thin lining applications to protect against severe abrasion. To prepare for use, blend Rescobond MAAX with water. Rescobond MAAX is an air setting material, and it utilizes the same binder system as Rescobond AA-22S. It can also be used to patch other refractory linings. Rescobond MAAX is an upgraded version of Rescobond AA-22S.
Conventional Castable

Rescocast 110 EZArrow icon

RESCOCAST 110EZ is a casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110EZ can be installed using vibration casting methods or as a self flowing material that requires minimal vibration. It is the product of choice when performance and insulation is desired in a single product. RESCOCAST 110EZ cannot be pumped.
RESCOCAST 110EZ is a casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110EZ can be installed using vibration casting methods or as a self flowing material that requires minimal vibration. It is the product of choice when performance and insulation is desired in a single product. RESCOCAST 110EZ cannot be pumped.
Conventional Castable

Rescocast 110CArrow icon

RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.
RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.
Conventional Castable

Rescocast 110C (UK)Arrow icon

RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.
RESCOCAST 110C is a vibratrion casting grade refractory that combines strength and abrasion resistant qualities with low thermal conductivity. RESCOCAST 110C is the product of choice when both performance and insulation is desired in a single product.
Conventional Castable

RESCOCAST 110GArrow icon

RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".
Conventional Castable

RESCOCAST 110G (UK)Arrow icon

RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 110G is a unique gunning grade refractory that has been formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G is the gun mix of choice when high performance and insulating value are desired in a single gun mix. Data shown below are average results of property tests, following the guidelines stated in ASTM C-903 Method; "Preparing Refractory Concrete Specimens by Cold Gunning".
Conventional Castable

Rescocast 110G QTArrow icon

RESCOCAST 110G QT is a unique gunning grade refractory that is formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G QT is the gun mix of choice when high performance and insulating value are desired in a single gun mix. After the initial set,this unique insulating castable can be heated without the traditional ramp-and-hold heating schedule.
RESCOCAST 110G QT is a unique gunning grade refractory that is formulated to have high strength and abrasion resistance with relatively low thermal conductivity. RESCOCAST 110G QT is the gun mix of choice when high performance and insulating value are desired in a single gun mix. After the initial set,this unique insulating castable can be heated without the traditional ramp-and-hold heating schedule.
Conventional Castable

Rescocast 110PCArrow icon

A high strength, medium weight insulating castable formulated primarily for pumpcasting.
A high strength, medium weight insulating castable formulated primarily for pumpcasting.
Conventional Castable

RESCOCAST 17E (UK)Arrow icon

Rescocast 17E has been used for many years as an erosion resistant lining material. It's low iron content makes it a good choice for units operating with high co contents, such as blast furnace take-offs and flue gas lines. Rescocast 17E is used in applications where it is not practical to install the material by vibration casting or gunning. Typically it would be used handpacking installations such as field joints or applications using hex-steel type anchorage systems.
Rescocast 17E has been used for many years as an erosion resistant lining material. It's low iron content makes it a good choice for units operating with high co contents, such as blast furnace take-offs and flue gas lines. Rescocast 17E is used in applications where it is not practical to install the material by vibration casting or gunning. Typically it would be used handpacking installations such as field joints or applications using hex-steel type anchorage systems.
Conventional Castable

Rescocast 17ECArrow icon

RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
Conventional Castable

Rescocast 17EC (UK)Arrow icon

RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
Conventional Castable

Rescocast 17EGArrow icon

RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
Conventional Castable

Rescocast 17EG (UK)Arrow icon

RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
Conventional Castable

Rescocast 17EMCArrow icon

RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.
RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.
Conventional Castable

Rescocast 17EMC (UK)Arrow icon

RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.
RESCOCAST 17EMC is a thermal shock resistant castable with low thermal conductivity and moderate abrasion resistance. This product should be installed using vibration casting methods.
Conventional Castable

Rescocast 17EMGArrow icon

RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.
RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.
Conventional Castable

Rescocast 17EMG (UK)Arrow icon

RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.
RESCOCAST 17EMG gunning grade refractory is for gunite applications only and has a quick set time once water is added at the nozzle. It is less sensitive to lower installation temperatures and can usually be applied directly to the wall without “aging”. Lower thermal conductivity, higher resistance to thermal spalling and erosion are some of the unique properties of this patented system of raw materials. Data shown are average results of tests following the guidelines set forth in ASTM C-903 “Preparing Refractory Concrete Specimens by Cold Gunning”.
Conventional Castable

Rescocast 17EPCArrow icon

RESCOCAST 17EPC is the pumpable version of Rescocast 17EC. This pumpable product can be installed in many refinery applcations that currently use Rescocast 17EC, such as riser lines, overhead lines, Y-sections, U-bends, and other catalyst transfer lines in petrochemical refineries
RESCOCAST 17EPC is the pumpable version of Rescocast 17EC. This pumpable product can be installed in many refinery applcations that currently use Rescocast 17EC, such as riser lines, overhead lines, Y-sections, U-bends, and other catalyst transfer lines in petrochemical refineries
Insulating Castable

Rescocast 3EArrow icon

RESCOCAST 3E is a high strength, special lightweight heat insulating castable designed primarily for use in the petrochemical industry for single component linings in FCC vessels, etc. The product can be applied by gunite or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3E PC is recommended.
RESCOCAST 3E is a high strength, special lightweight heat insulating castable designed primarily for use in the petrochemical industry for single component linings in FCC vessels, etc. The product can be applied by gunite or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3E PC is recommended.
Insulating Castable

Rescocast 3E (UK)Arrow icon

RESCOCAST 3E is a high strength, special lightweight heat insulating castable designed primarily for use in the petrochemical industry for single component linings in FCC vessels, etc. The product can be applied by gunite or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3E PC is recommended.
RESCOCAST 3E is a high strength, special lightweight heat insulating castable designed primarily for use in the petrochemical industry for single component linings in FCC vessels, etc. The product can be applied by gunite or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3E PC is recommended.
Insulating Castable

Rescocast 6Arrow icon

RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
Insulating Castable

Rescocast 6 (UK)Arrow icon

RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
Insulating Castable

Rescocast 6PCArrow icon

RESCOCAST 6PC is a high strength, medium weight insulating castable designed primarily for pumpcasting and shotcreting installation methods. RESCOCAST 6PC can also be installed using standard casting methods. It has been applied by pumpcasting on both regenerator and reactor vessel walls, as well as in fired heaters. Pumpcasting and shotcreting methods produce a uniform, lamination free lining when compared to gunned linings.
RESCOCAST 6PC is a high strength, medium weight insulating castable designed primarily for pumpcasting and shotcreting installation methods. RESCOCAST 6PC can also be installed using standard casting methods. It has been applied by pumpcasting on both regenerator and reactor vessel walls, as well as in fired heaters. Pumpcasting and shotcreting methods produce a uniform, lamination free lining when compared to gunned linings.
Insulating Castable

Rescocast 7Arrow icon

RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
Insulating Castable

Rescocast 7 (UK)Arrow icon

RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
Insulating Castable

Rescocast 9Arrow icon

RESCOCAST 9 combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9 has been used throughout the world for this and other critical applications. RESCOCAST 9 can be installed by either casting or gunning. For a pumpcasting or shotcreting applications, Rescocast 9LIPC is recommended.
RESCOCAST 9 combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9 has been used throughout the world for this and other critical applications. RESCOCAST 9 can be installed by either casting or gunning. For a pumpcasting or shotcreting applications, Rescocast 9LIPC is recommended.
Insulating Castable

Rescocast 9 (UK)Arrow icon

RESCOCAST 9 combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9 has been used throughout the world for this and other critical applications. RESCOCAST 9 can be installed by either casting or gunning. For a pumpcasting or shotcreting applications, Rescocast 9LIPC is recommended.
RESCOCAST 9 combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9 has been used throughout the world for this and other critical applications. RESCOCAST 9 can be installed by either casting or gunning. For a pumpcasting or shotcreting applications, Rescocast 9LIPC is recommended.
Insulating Castable

Rescocast 9LIArrow icon

RESCOCAST 9LI combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI has been used throughout the world for this and other critical applications. RESCOCAST 9LI can be installed by either casting or gunning. For pumpcasting or shotcreting applications, Rescocast 9LI PC is recommended.
RESCOCAST 9LI combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI has been used throughout the world for this and other critical applications. RESCOCAST 9LI can be installed by either casting or gunning. For pumpcasting or shotcreting applications, Rescocast 9LI PC is recommended.
Insulating Castable

Rescocast 9LI PCArrow icon

RESCOCAST 9 LI PC combines the qualities of an insulating and general duty castable. High strength and good protection against heat loss have made this product an ideal choice for FCC regenerator and reactor walls. RESCOCAST 9 LI PC can be installed by both pumpcasting and wet shotcreting.
RESCOCAST 9 LI PC combines the qualities of an insulating and general duty castable. High strength and good protection against heat loss have made this product an ideal choice for FCC regenerator and reactor walls. RESCOCAST 9 LI PC can be installed by both pumpcasting and wet shotcreting.
Insulating Castable

Rescocast 9LI-SWArrow icon

RESCOCAST 9LI-SW combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI-SW has been used throughout the world for this and other critical applications. RESCOCAST 9LI-SW can be installed by either casting or gunning.
RESCOCAST 9LI-SW combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI-SW has been used throughout the world for this and other critical applications. RESCOCAST 9LI-SW can be installed by either casting or gunning.
Insulating Castable

Rescocast 9LI-SW (UK)Arrow icon

RESCOCAST 9LI-SW combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI-SW has been used throughout the world for this and other critical applications. RESCOCAST 9LI-SW can be installed by either casting or gunning.
RESCOCAST 9LI-SW combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI-SW has been used throughout the world for this and other critical applications. RESCOCAST 9LI-SW can be installed by either casting or gunning.
Insulating Castable

Rescocast RS-3005-NSArrow icon

High purity alumina insulating castable. Vibration casting is the recommended installation method for this product. This product features a low thermal conductivity and a very high maximum temperature limit. The trace amounts of silica and iron oxide make this product ideal for use in carbon monoxide and hydrogen atmospheres especially at high temperatures.
High purity alumina insulating castable. Vibration casting is the recommended installation method for this product. This product features a low thermal conductivity and a very high maximum temperature limit. The trace amounts of silica and iron oxide make this product ideal for use in carbon monoxide and hydrogen atmospheres especially at high temperatures.
Low Cement Castable

R-Max 85Arrow icon

R-MAX 85 is a Abrasion-Resistant 85% Alumina Castable that features very high abrasion resistance with good flow under vibration. This castable should be installed by vibration casting only.
R-MAX 85 is a Abrasion-Resistant 85% Alumina Castable that features very high abrasion resistance with good flow under vibration. This castable should be installed by vibration casting only.
Low Cement Castable

R-Max C (ESC)Arrow icon

R-MAX C is a Abrasion-Resistant, Low Cement 70% Alumina Castable. This castable should be installed by vibration casting only; specifically form vibration.
R-MAX C is a Abrasion-Resistant, Low Cement 70% Alumina Castable. This castable should be installed by vibration casting only; specifically form vibration.
Low Cement Castable

R-Max MPArrow icon

R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.
R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.
Low Cement Castable

R-Max MP (UK)Arrow icon

R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.
R-Max MP is a high performance castable designed to provide maximum abrasion resistance and superior ease of installation. The product's zero-slump and soft "easy to install" texture results in high handpack installation rates.
Low Cement Castable

R-Max SFArrow icon

A self leveling, 92% alumina castable with maximum erosion resistance, that can installed using the products’s self leveling characteristic or pumpcasting methods. This product should be used in areas subjected to severe abrasion. It is suggested that vibration should not be used during installation since it is a self leveling product.
A self leveling, 92% alumina castable with maximum erosion resistance, that can installed using the products’s self leveling characteristic or pumpcasting methods. This product should be used in areas subjected to severe abrasion. It is suggested that vibration should not be used during installation since it is a self leveling product.
Conventional Castable

Sureflow 110 (UK)Arrow icon

SUREFLOW 110 is a free flowing refractory that combines strength and abrasion resistant qualities with low thermal conductivity. SUREFLOW 110 is the product of choice when both performance and insulation is desired in a single product. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 110 cannot be pumpcast.
SUREFLOW 110 is a free flowing refractory that combines strength and abrasion resistant qualities with low thermal conductivity. SUREFLOW 110 is the product of choice when both performance and insulation is desired in a single product. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 110 cannot be pumpcast.
Conventional Castable

Sureflow 17AArrow icon

SUREFLOW 17A is a high purity, low iron castable suitable for high temperature applications. Its ideal for reducing atmospheres such as hydrogen and/or carbon monoxide and also provides excellent resistance to slags and high temperature corrosive atmospheres. This product should be installed by pouring; no vibration is needed during installation. It should be noted that SUREFLOW 17A is not recommended for pumpcasting.<br> <div><br> </div>
SUREFLOW 17A is a high purity, low iron castable suitable for high temperature applications. Its ideal for reducing atmospheres such as hydrogen and/or carbon monoxide and also provides excellent resistance to slags and high temperature corrosive atmospheres. This product should be installed by pouring; no vibration is needed during installation. It should be noted that SUREFLOW 17A is not recommended for pumpcasting.<br> <div><br> </div>
Conventional Castable

Sureflow 17EArrow icon

SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.
SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.
Conventional Castable

Sureflow 17E (UK)Arrow icon

SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.
SUREFLOW 17E is a high cement, self leveling castable that offers high strength and excellent resistance to abrasion. It has the same physical properties as Rescocast 17EC with the added advantage of flowing into place without heavy vibration. This product should be installed by pouring; no vibration is needed during installation. SUREFLOW 17E cannot be pumpcast.
Low Cement Castable

Sureflow FS-6LCArrow icon

SUREFLOW FS-6LC is a low cement, self-leveling, fused silica castable that offers high strength, excellent resistance to abrasion, and low reversible thermal expansion. This product may be cast or pumpcast.
SUREFLOW FS-6LC is a low cement, self-leveling, fused silica castable that offers high strength, excellent resistance to abrasion, and low reversible thermal expansion. This product may be cast or pumpcast.