$Glass Refractories - Resco Products$

Glass

Resco manufactures high-quality refractories for the glass market. Our products provide you high stability, thermal shock resistance, low thermal expansion, chemical stability, and corrosion resistance within glass furnaces. Working with Resco, you can feel secure knowing you’re getting precise shapes to fit your application. Our excellent materials and consistent properties aligned with the glass manufacturing standards will exceed your expectations.

Our glass specialists have the experience to evaluate your business procedures and conditions to recommend the best solution. Resco provides glass production refractory materials and has the ability to create fully customized solutions through our advanced technical and engineering team. Resco Products has the right high-temperature refractories for every part of your process. Including the regenerator, melter, distributor, and forehearth to create molten glass.

Glass Refractory Solutions You Can Count On

Resco Products has decades of experience, and we know the glass industry inside out. Our team will work with you to design everything to your exact specifications using 3D modeling and other drafting tools. Plus, our glass specialists can discuss pricing to make sure you don't shatter your budget.

Feel free to reach out to us — we'll do our best to find a custom solution for you. In addition to glass industry refractories, we have a variety of services available that could work for your application. Contact Resco Products now to find out what we can do to streamline your process.

RELATED PRODUCTS

Magnesia Brick

CRB-20

Burned, Fused Grain, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

PDS SDS

Burned, Fused Grain, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

Dry Mortar

Fifty-Fifty Mortar

FIFTY-FIFTY is a Dry, Heat-Setting, Super Duty Mortar and is available in a dry powder form. When installing, mix with water to desired consistency.

PDS SDS

FIFTY-FIFTY is a Dry, Heat-Setting, Super Duty Mortar and is available in a dry powder form. When installing, mix with water to desired consistency.

Conventional Castable

Hi Strength 25

HI-STRENGTH™ 25 is a very cost-effective, high duty refractory castable designed to resist abrasion and erosion at moderate temperatures. It has excellent thermal shock resistance and is widely used as a refractory lining and maintenance material for many different applications.

PDS SDS

Conventional Castable

Hi Strength 28LI

HI-STRENGTH™ 28-LI produces a tough, monolithic structure with negligible shrinkage. It has good refractoriness with a 2800°F use limit. A casting or ramming consistency may be obtained by control of water during mixing.

PDS SDS

Low Cement Castable

Kricon 30

KRICON® 30 is a low iron castable with good slag resistance up to 3000°F

PDS SDS

KRICON® 30 is a low iron castable with good slag resistance up to 3000°F

Low Cement Castable

Kricon 32

KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.

PDS SDS

KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.

Low Cement Castable

Kricon 32-70

KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.

PDS SDS

Dry Mortar

Larcobond

A volume stable refractory mortar with good water retention and workability. Suitable for dipping or troweling.

PDS SDS

A volume stable refractory mortar with good water retention and workability. Suitable for dipping or troweling.

Wet Mortar

Larcobond AS

LARCOBOND AS is an dry, air-setting chrome mortar that has good workability and water retention. This mortar is suitable for dipping and trowelling

PDS SDS

LARCOBOND AS is an dry, air-setting chrome mortar that has good workability and water retention. This mortar is suitable for dipping and trowelling

Insulating Firebrick

LW 20

2000ºF insulating fire brick

PDS SDS

2000ºF insulating fire brick

Insulating Firebrick

LW-20 LI

2000ºF insulating fire brick

SDS

2000ºF insulating fire brick

Insulating Firebrick

LW-23

2300ºF insulating fire brick

PDS SDS

2300ºF insulating fire brick

Insulating Firebrick

LW-23 LI

2300ºF insulating fire brick

PDS SDS

2300ºF insulating fire brick

Insulating Firebrick

LW-25

2500ºF insulating fire brick

PDS SDS

2500ºF insulating fire brick

Insulating Firebrick

LW-26

2600ºF insulating fire brick

PDS SDS

2600ºF insulating fire brick

Insulating Firebrick

LW-28

2800ºF insulating fire brick

PDS SDS

2800ºF insulating fire brick

Insulating Firebrick

LW-30

3000ºF insulating fire brick

PDS SDS

3000ºF insulating fire brick

Insulating Firebrick

LW-32

3200ºF insulating fire brick

PDS SDS

3200ºF insulating fire brick

Magnesia Brick

Nucon 60

Direct bonded, magnesite-chrome brick, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

PDS SDS

Direct bonded, magnesite-chrome brick, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

Magnesia Brick

Nucon 60 15-87

Direct bonded, magnesite-chrome brick, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

PDS SDS

Direct bonded, magnesite-chrome brick, Chrome Magnesite Brick, Mag Chrome, Mag-Chrome

Magnesia Brick

Oxiline H

Burned high purity magnesite brick

PDS SDS

Burned high purity magnesite brick

Magnesia Brick

Oxiline H-SR

Burned, spall resistant, high purity magnesite brick

PDS SDS

Burned, spall resistant, high purity magnesite brick

Alumina Brick

Patriot

Burned fire clay brick

PDS SDS

Burned fire clay brick

Alumina Brick

Patriot HF

High fired, super duty, carbon monoxide resistant brick

PDS SDS

High fired, super duty, carbon monoxide resistant brick

Dry Mortar

Permanente Mortar

PERMANENTE® MORTAR is a dry, heat setting, high magnesia mortar. This magnesite mortar is designed to lay up basic brick. Ideally suited for use with magnesite or magnesia-carbon brick. This mortar is suggested for working and safety linings in both steel and non-ferrous metals applications.

PDS SDS

Low Cement Castable

ProGun LC 50G

ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.

PDS

ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.

Low Cement Castable

ProGun LC 56SCG

ProGun LC 56SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.

PDS SDS

Low Cement Castable

ProGun LC 60G

ProGun LC 60G is a sixty percent alumina, mullite based, 3100oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths. ProGun LC 60G withstands severe high temperature atmosphere reactions, and erosive corrosive environments.

PDS SDS

Low Cement Castable

ProGun LC 60G (UK)

PDS SDS

Low Cement Castable

ProGun LC 60SCG (UK)

ProGun LC 60SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.

PDS SDS

Low Cement Castable

ProGun LC 65SCG (UK)

ProGun LC 65SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.

PDS SDS

Low Cement Castable

ProGun LC 70G

ProGun LC 70G is a 3200oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give minimum porosity and low linear change with maximum density and high fired strengths, and can withstand severe high temperature erosive and corrosive environments.

PDS SDS

Low Cement Castable

ProGun LC 70SCG (UK)

ProGun LC 70SCG is a SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance, non-wetting characteristics and high heat transfer of SiC make this product an excellent choice for riser lines and pre-heater sections in CEMENT PLANTS and in combustion zones in POWER GENERATION units exclusively. This tightly bonded SiC product greatly reduces (or eliminates) surface slagging and clinker/alkali build-up.

PDS SDS

Low Cement Castable

ProGun LC 80SCG

ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.

PDS SDS

Low Cement Castable

ProGun LC FS-6

ProGun LC FS-6 is a low cement, fused silica gun mix that offers high strength, very good resistance to abrasion, and low reversible thermal expansion.

PDS SDS

ProGun LC FS-6 is a low cement, fused silica gun mix that offers high strength, very good resistance to abrasion, and low reversible thermal expansion.

Insulating Castable

QuikLite 3-35P

QUIKLITE 3-35P is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35P features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35P can be initially heated without using the traditional ramp-and-hold heatup schedule

PDS SDS

Insulating Castable

QuikLite 3-35PC

QUIKLITE 3-35PC is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35PC features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35PC can be initially heated without using the traditional ramp-and-hold heatup schedule.

PDS SDS

Insulating Castable

QuikLite 3A-DS

QUIKLITE 3A-DS is a dust suppressed, lightweight castable formulated for use in reducing atmospheres. This product can be installed by casting or conventional gunning methods. QUIKLITE 3A-DS features a reduced dust level and low iron oxide content. After the initial set, QUIKLITE 3A-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.

PDS SDS

Insulating Castable

QUIKLITE 3B (UK)

QUIKLITE 3B is a 50 lb/ft2 insulating material that is easily placed by troweling, gunning, or casting and is formulated for a rapid heatup, without using the traditional ramp-and-hold heating schedule. This ease of application combined with its good insulating values makes this an ideal choice for heaters, ducts, and other related components.

PDS

Insulating Castable

QUIKLITE 3BLI (UK)

Quiklite 3BLI is a 1400°c low iron insulating material designed for installation by casting or gunning.It is formulated for rapid heatup without using the traditional ramp and hold heating schedule.

PDS SDS

Quiklite 3BLI is a 1400°c low iron insulating material designed for installation by casting or gunning.It is formulated for rapid heatup without using the traditional ramp and hold heating schedule.

Insulating Castable

QuikLite 3-DS

QUIKLITE 3-DS is a dust suppressed, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, a nominal 60 pcf cast density, and good strength. After the initial set, QUIKLITE 3-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.

PDS SDS

Insulating Castable

QuikLite 3E-DS

QUIKLITE 3E-DS is a special, dust suppressed, lightweight castable formulated for use in the petrochemical industry as a single component lining. This product can be installed by casting or conventional gunning methods. QUIKLITE 3E-DS features a reduced dust level and high strength. After the initial set, QUIKLITE 3E-DS can be initially heated without using the traditional ramp-and-hold heatup schedule. For pumping or shotcreting, QUIKLITE 3E PC is recommended.

PDS SDS

Insulating Castable

QuikLite 3PC

QUIKLITE 3 PC is a lightweight castable formulated to be installed by pumping or shotcreting methods. After the initial set, this unique insulating castable can be initially heated without using the traditional ramp-and-hold heatup schedule.

PDS SDS

Insulating Castable

QuikLite 6

QUIKLITE 6 is a special high strength, medium weight insulating castable formulated primarily for use in the petrochemical industry. This product can be installed by conventional casting or gunning methods. After the initial set, QUIKLITE 6 can be heated without using the traditional ramp-and-hold heatup schedule.

PDS SDS

Insulating Castable

QuikLite 6PC

QUIKLITE 6 PC is a high strength, medium weight castable formulated to be installed by pumping or shotcreting methods. After the initial set, this unique insulating castable can be initially heated without using the traditional ramp-and-hold heatup schedule.  

PDS SDS

Low Cement Castable

Quikturn AZS G

QUIKTURN AZS G is a low cement gun mix that contains a AZS-based (alumina-zirconia-silica) aggregate. This unique gun mix was formulated for cement preheater towers that require an abrasion-resistant gun mix that can resist dust buildup. After the final set, this unique gun mix can be heated without the traditional ramp-and-hold heating schedule.

PDS SDS

Chemically Bonded Castables

Rescobond 3000

RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.

PDS SDS

Chemically Bonded Castables

Rescobond 3000 (UK)

PDS SDS

Conventional Castable

Rescocast 17AC

RESCOCAST 17AC is a high temperature, high purity alumina conventional castable with only trace amounts of silica and iron oxide. The high purity of this castable makes it an ideal choice for reducing atmospheres containing hydrogen and/or carbon monoxide. This product should be installed using vibration casting methods.

PDS SDS

Conventional Castable

Rescocast 17AC (UK)

PDS SDS

Basic Monolithics

Rescomag 90PC

RESCOMAG 90PC is a unique, pumpable, 90% MgO castable containing a dead-burned magnesite aggregate and can be vibration cast, pumped, or shotcreted. This basic castable features excellent resistance to basic slags.

PDS SDS

Wet Mortar

Rescoset 50M TR-D3

RESCOSET 50M is a high alumina class, mullite based, air-setting bonding mortar with a maximum recommended service temperature of 3000°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time.

PDS SDS

Conventional Castable

Sakonite

SAKONITE® is a very economical refractory concrete. Although its maximum service temperature is 2200°F, it is designed primarily for service between 70°F and 1000°F. It is widely used for cast floors exposed to molten metals or hot ingots. It can be cast or pumped and finished like ordinary concrete. It may also be rammed or cast-vibrated for increased density and strength with minimum shrinkage. SAKONITE® is also available as GC SAKONITE® gun mix.

PDS SDS

Alumina Brick

Seneca 60 P

Burned, high alumina brick

PDS SDS

Burned, high alumina brick

Wet Mortar

Spray Mix S-506

SPRAY MIX® is a 40% alumina, superduty fireclay, air-setting refractory coating mix with a service temperature limit of 3000ºF. It is specially designed to lengthen the life of the refractory to which it is applied. With refractory properties similar to superduty brick, it is especially well suited for patching firebrick walls that are spalled and worn. SPRAY MIX® adheres well to the refractory surface and forms a bond with it at normal furnace operating temperatures. The surface should be carefully built up by spraying successive thin layers over top of one another. It can be used as a preventative maintenance veneer coating over new walls. It can be placed by spraying, trowelling, or hand packing to a refractory surface cleaned of loose material and dust and moistened to prevent loss of water from the coating. It adheres best when applied to a hot or warm lining.

PDS SDS

Get a Quote